Upcoming Events

Tue 30 Sep 2025 - Wed 1 Oct 2025

08:30 AM BST - 04:30 PM BST (2 days)

Consistently IATF highlights Problem Solving as the most common nonconformity. There are plenty of steps your organisation can take to enhance its problem-solving capabilities and in an IATF 16949-compliant manner.

Mon 6 Oct 2025

08:30 AM BST - 04:30 PM BST (1 day)

ISO 45001:2018 has a significant impact on how organisations worldwide operate a health and safety management system. Complying with the requirements of ISO 45001 will bring benefits for organisations and their workers around the world. At the same time, it will present new challenges and opportunities for OH&S and audit professionals.

Mon 6 Oct 2025 - Tue 7 Oct 2025

08:30 AM BST - 04:30 PM BST (2 days)

The ISO 45001:2018 Internal Auditor Training is an interactive course supported by group exercises and open discussion.

Wed 8 Oct 2025 - Thu 9 Oct 2025

08:30 AM BST - 04:30 PM BST (2 days)

This course will help auditors develop relevant skills in judgment, decision making, audit planning, audit non-conformity writing and subsequent close out related to the aerospace IAQG 9100/9110/9120 QMS standards, AS13100 and AESQ RM13005. Internal auditing and familiarity with ISO 9001 and IAQG 9100/9110/9120 would be beneficial but not a necessity.

Wed 8 Oct 2025 - Thu 9 Oct 2025

08:30 AM BST - 04:30 PM BST (2 days)

The IATF 16949 Internal Auditor Training is a participative course and is made up of a number of modules supported by group exercises and open discussion. This course is available virtually in different time zones, please refer to the time zone section below.

Mon 13 Oct 2025 - Fri 17 Oct 2025

08:30 AM BST - 04:30 PM BST (5 days)

This training provides you with the basics for performing process audits according to VDA 6.3, considering the process-oriented approach and customer-specific requirements for comprehensive application in the automotive industry.

Mon 20 Oct 2025 - Tue 21 Oct 2025

08:30 AM BST - 04:30 PM BST (2 days)

FMEA is an analytical method to ensure potential problems have been considered, assessed for risk, and actioned as part of product and process design. It provides a record of an organisation's collective knowledge about its products and processes. The intent of the control plan is to document and provide value added controls in support of the PFMEA process. Implementation of an effective DFMEA, PFMEA and control plan form key foundation activities in support of the zero-defect goal.

Wed 22 Oct 2025 - Thu 23 Oct 2025

08:30 AM BST - 04:30 PM BST (2 days)

MSA is used when an understanding of measurement system variability is required. MSA studies will decompose measurement system variability into equipment, operator and part variation. It is often mandated by aerospace and other engineering primary manufacturers as a specific requirement on their suppliers to give them confidence in the measurements that are being taken and reported by the supplier.

Mon 3 Nov 2025 - Tue 4 Nov 2025

08:30 AM GMT - 04:30 PM GMT (2 days)

This course covers the training syllabus requirements of AS13100 and AESQ Reference Manual RM13000 8D Problem Solving. The AESQ Reference Manual RM13000 mandates the use of the Eight Disciplines (8D) approach to structured problem solving to provide a repeatable structured approach irrespective of customer.

Mon 3 Nov 2025 - Fri 7 Nov 2025

08:30 AM GMT - 04:30 PM GMT (5 days)

This participative course is made up of a number of modules supported by group exercises and open discussion. Delegates are evaluated through a proctored knowledge and application exam at the end of the course. The practical emphasis of this course and high tutor to delegate contact provides a unique opportunity for a substantial degree of individual guidance and training.

Mon 10 Nov 2025

08:30 AM GMT - 04:30 PM GMT (1 day)

APQP and Control Plan is module one of the Core Tools Certification Training programme. This module can be completed as a standalone course or as part of the full Core Tools Certification Training.

Mon 10 Nov 2025 - Fri 14 Nov 2025

08:30 AM GMT - 04:30 PM GMT (5 days)

The Core Tools Certification Training (APQP, Control Plan, FMEA, SPC, MSA and PPAP) is a 5 day course covering all the core tools using a "learn by doing" teaching approach. After short teach points delegates practice the use of the tools using case studies and delegate exercises. Delegates passing the application exam at the end of the course receive certification from the SMMT IATF approved oversight office in the UK.

Tue 11 Nov 2025

08:30 AM GMT - 04:30 PM GMT (1 day)

AIAG & VDA Combined Process FMEA: Transitioning for Practitioners is designed to take delegates through the 7 Step Approach to the construction, scoring and evaluation of risk (high, medium, low) and explain how to fully implement the new AIAG/VDA approach.

Tue 11 Nov 2025

08:30 AM GMT - 04:30 PM GMT (1 day)

Failure Modes and Effects Analysis, (FMEA), is an analytical method to ensure potential problems have been considered, assessed for risk and actioned as part of both product and process design. It provides a record of an organisations collective knowledge about products and processes. It is widely used in many industrial sectors such as automotive, aerospace, renewable energy and mobile power generation. This course is based on the AIAG & VDA FMEA Handbook.

Wed 12 Nov 2025

08:30 AM GMT - 04:30 PM GMT (1 day)

Statistical Process Control, (SPC), is a method for gaining an understanding of the types of variation within a process and hence guide actions to either control or reduce this variation. It is used in many industrial sectors such as automotive, aerospace, renewable energy and mobile power generation.

Thu 13 Nov 2025

08:30 AM GMT - 04:30 PM GMT (1 day)

Measurement System Analysis, (MSA), is a method for gaining an understanding of the variation present in measuring systems. It is now widely used in many industrial sectors such as automotive, aerospace, renewable energy and mobile power generation, when a high level of confidence is required for the measurement of product characteristics.

Mon 24 Nov 2025 - Fri 28 Nov 2025

08:30 AM GMT - 04:30 PM GMT (5 days)

Become a certified ISO 14001:2015 Lead Auditor with our expert-led IEMA approved training. Start your journey to auditing excellence today. Complying with the requirements of ISO 14001 can assist an organisation seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillars of sustainability. Particularly: — enhancement of environmental performance — fulfilment of compliance obligations — achievement of environmental objectives

Mon 1 Dec 2025 - Tue 2 Dec 2025

08:30 AM GMT - 04:30 PM GMT (2 days)

The IATF 16949 Internal Auditor Training is a participative course and is made up of a number of modules supported by group exercises and open discussion. This course is available virtually in different time zones, please refer to the time zone section below.

Mon 1 Dec 2025 - Thu 4 Dec 2025

08:30 AM GMT - 04:30 PM GMT (4 days)

This training provides you with the basics for performing process audits according to VDA 6.3.

Mon 1 Dec 2025 - Fri 5 Dec 2025

08:30 AM GMT - 04:30 PM GMT (5 days)

This training provides you with the basics for performing process audits according to VDA 6.3, considering the process-oriented approach and customer-specific requirements for comprehensive application in the automotive industry.