Live online events
October 2025
Mon 13 Oct 2025 - Fri 17 Oct 2025
08:30 AM BST - 04:30 PM BST (5 days)
The Core Tools Certification Training (APQP, Control Plan, FMEA, SPC, MSA and PPAP) is a 5 day course covering all the core tools using a "learn by doing" teaching approach. After short teach points delegates practice the use of the tools using case studies and delegate exercises. Delegates passing the application exam at the end of the course receive certification from the SMMT IATF approved oversight office in the UK.
More Information
Mon 13 Oct 2025 - Fri 17 Oct 2025
08:30 AM BST - 04:30 PM BST (5 days)
This training provides you with the basics for performing process audits according to VDA 6.3, considering the process-oriented approach and customer-specific requirements for comprehensive application in the automotive industry.
More Information
Tue 14 Oct 2025
08:30 AM BST - 04:30 PM BST (1 day)
Failure Modes and Effects Analysis, (FMEA), is an analytical method to ensure potential problems have been considered, assessed for risk and actioned as part of both product and process design. It provides a record of an organisations collective knowledge about products and processes. It is widely used in many industrial sectors such as automotive, aerospace, renewable energy and mobile power generation. This course is based on the AIAG & VDA FMEA Handbook.
More Information
Wed 15 Oct 2025 - Thu 16 Oct 2025
08:30 AM BST - 04:30 PM BST (2 days)
Consistently IATF highlights Problem Solving as the most common nonconformity. There are plenty of steps your organisation can take to enhance its problem-solving capabilities and in an IATF 16949-compliant manner.
More Information
Wed 15 Oct 2025
08:30 AM BST - 04:30 PM BST (1 day)
Statistical Process Control, (SPC), is a method for gaining an understanding of the types of variation within a process and hence guide actions to either control or reduce this variation. It is used in many industrial sectors such as automotive, aerospace, renewable energy and mobile power generation.
More Information
Thu 16 Oct 2025
08:30 AM BST - 04:30 PM BST (1 day)
Measurement System Analysis, (MSA), is a method for gaining an understanding of the variation present in measuring systems. It is now widely used in many industrial sectors such as automotive, aerospace, renewable energy and mobile power generation, when a high level of confidence is required for the measurement of product characteristics.
More Information
Mon 20 Oct 2025 - Tue 21 Oct 2025
08:30 AM BST - 04:30 PM BST (2 days)
FMEA is an analytical method to ensure potential problems have been considered, assessed for risk, and actioned as part of product and process design. It provides a record of an organisation's collective knowledge about its products and processes. The intent of the control plan is to document and provide value added controls in support of the PFMEA process. Implementation of an effective DFMEA, PFMEA and control plan form key foundation activities in support of the zero-defect goal.
More Information
Mon 20 Oct 2025 - Tue 21 Oct 2025
08:30 AM BST - 04:30 PM BST (2 days)
In order to ensure a high quality of the audit activities in companies and the entire supply chain, auditors need to have the appropriate competence in relation to the respective methods.
More Information
Wed 22 Oct 2025 - Thu 23 Oct 2025
08:30 AM BST - 04:30 PM BST (2 days)
MSA is used when an understanding of measurement system variability is required. MSA studies will decompose measurement system variability into equipment, operator and part variation. It is often mandated by aerospace and other engineering primary manufacturers as a specific requirement on their suppliers to give them confidence in the measurements that are being taken and reported by the supplier.
More Information
Wed 22 Oct 2025 - Thu 23 Oct 2025
08:30 AM BST - 04:30 PM BST (2 days)
Every organisation within the automotive supply chain is obligated to ensure the safety and conformity of its products. The aim of this two-day qualification is specifically geared to the requirements in the participants’ daily practice.
More InformationNovember 2025
Mon 3 Nov 2025 - Tue 4 Nov 2025
08:30 AM GMT - 04:30 PM GMT (2 days)
This course covers the training syllabus requirements of AS13100 and AESQ Reference Manual RM13000 8D Problem Solving. The AESQ Reference Manual RM13000 mandates the use of the Eight Disciplines (8D) approach to structured problem solving to provide a repeatable structured approach irrespective of customer.
More Information
Mon 3 Nov 2025 - Fri 7 Nov 2025
08:30 AM GMT - 04:30 PM GMT (5 days)
This participative course is made up of a number of modules supported by group exercises and open discussion. Delegates are evaluated through a proctored knowledge and application exam at the end of the course. The practical emphasis of this course and high tutor to delegate contact provides a unique opportunity for a substantial degree of individual guidance and training.
More Information
Mon 3 Nov 2025 - Thu 6 Nov 2025
08:30 AM GMT - 04:30 PM GMT (4 days)
This training provides you with the basics for performing process audits according to VDA 6.3.
More InformationMon 3 Nov 2025 - Fri 7 Nov 2025
08:30 AM GMT - 04:30 PM GMT (5 days)
This training provides you with the basics for performing process audits according to VDA 6.3, considering the process-oriented approach and customer-specific requirements for comprehensive application in the automotive industry.
More Information
Wed 5 Nov 2025 - Thu 6 Nov 2025
08:30 AM GMT - 04:30 PM GMT (2 days)
The IATF 16949 Internal Auditor Training is a participative course and is made up of a number of modules supported by group exercises and open discussion.
More Information
10
Nov
Aerospace PPAP Co-ordinator and CARe Qualification (Based AESQ RM13145)
Online (UK / Europe / India)
Mon 10 Nov 2025 - Thu 13 Nov 2025
07:30 AM GMT - 01:30 PM GMT (4 days)
This course fully covers the syllabus and qualification requirements for PPAP Co-ordinators or CARe’s as defined by AESQ Reference Manual RM13145. The course draws from AS13100 sections B and C and follows the APQP/PPAP model as defined within AS9145 and AESQ RM13145. As well as face to face training in Birmingham, UK, we also deliver this course for different timezones throughout the year virtually, please refer to the timezone section below for the latest schedule.
More Information
Mon 10 Nov 2025
08:30 AM GMT - 04:30 PM GMT (1 day)
APQP and Control Plan is module one of the Core Tools Certification Training programme. This module can be completed as a standalone course or as part of the full Core Tools Certification Training.
More InformationMon 10 Nov 2025 - Fri 14 Nov 2025
08:30 AM GMT - 04:30 PM GMT (5 days)
The Core Tools Certification Training (APQP, Control Plan, FMEA, SPC, MSA and PPAP) is a 5 day course covering all the core tools using a "learn by doing" teaching approach. After short teach points delegates practice the use of the tools using case studies and delegate exercises. Delegates passing the application exam at the end of the course receive certification from the SMMT IATF approved oversight office in the UK.
More InformationTue 11 Nov 2025
08:30 AM GMT - 04:30 PM GMT (1 day)
Failure Modes and Effects Analysis, (FMEA), is an analytical method to ensure potential problems have been considered, assessed for risk and actioned as part of both product and process design. It provides a record of an organisations collective knowledge about products and processes. It is widely used in many industrial sectors such as automotive, aerospace, renewable energy and mobile power generation. This course is based on the AIAG & VDA FMEA Handbook.
More InformationWed 12 Nov 2025
08:30 AM GMT - 04:30 PM GMT (1 day)
Statistical Process Control, (SPC), is a method for gaining an understanding of the types of variation within a process and hence guide actions to either control or reduce this variation. It is used in many industrial sectors such as automotive, aerospace, renewable energy and mobile power generation.
More Information
